Aquila Fire 1
Protection with comfort while fighting fireCertification
EN 469, Standard on Structural Fire FightingApplications
Structural Fire Fighting, Industrial Fire FightingMaterials
• Outer Shell: Nomex® III A, Navy Blue /Gold, 195 Gsm
• Moisture Barrier: EPTFE Coated On Non Woven Nomex/ Kevlar Carrier – 105 Gsm
• Thermal Liner: Non-Woven Nomex/ Kevlar Quilted With Aramid/Viscose Fabric, 70 Gsm + 120Gsm
• “H” Style suspender (Removable)
• 2” Reflective Liners
BLITZFIRE Series BLITZFIRE-HE OSC XX211A-HE 2.5″F SWIVEL ROCKER X 2.5″M
Specifications
| Coupling Style Side A | Rocker |
| Finish | Dark Blue |
| Horizontal Control | N/A |
| Horizontal Movementdegrees | 20 left and right of center |
| Inlet | 2.5" (65 mm) |
| Max Flow | 500 gpm (2,000 l/min) |
| Operation Energy Source | Manual |
| Oscillation | Yes |
| Outlet | 2.5" (65 mm) |
| Package | No |
| Safety Shutoff | Yes |
| Valve Design | Aluminum Slide Valve |
| Vertical Control | N/A |
| Vertical Movementdegrees | 10 to 86 above horizontal |
| Weight | 32 |
| Safety Inlet | No |
BULLARD FIREFIGHTER HELMET
Bulldozer Fire Fighting Suit
CROSSFIRE Series SAFE-TAK BASE-2.5″BSPF INLETS XFH-2BJ DOUBLE INLET-1250 GPM VERSION
Specifications
| Coupling Size Side A | 2.5" (65 mm) |
| Coupling Size Side B | 2.5" (65 mm) |
| Coupling Style Side A | Rocker |
| Finish | Fire Engine Red |
| Horizontal Control | N/A |
| Horizontal Movementdegrees | N/A |
| Inlet | Portable Base Dual Inlet |
| Max Flow | 1,250gpm (4,500 l/min) |
| Operation Energy Source | Manual |
| Oscillation | No |
| Outlet | Quick Connect Male |
| Package | No |
| Safety Shutoff | Yes |
| Valve Design | No Valve |
| Vertical Control | N/A |
| Vertical Movementdegrees | N/A |
| Weight | 30.2 |
| Safety Inlet | No |
DN 800 High Expansion Foam Generator
DN500 High Expansion Foam Generator
Features
- Portable generator made entirely in aluminium alloy. Polyester coating and hard anodisation
- Can be used either as high expansion foam generator or without its extractor function as simple fan
- It comes in two versions: 500 expansion or variable expansion from 500 to 1,200
- Flow rate is 225 lpm at 6-7 bar
- The foam concentrate is introduced in the device via a pick-up tube
FIRE FIGHTING BOOTS BULLDOZER 9788
Manufactured using both Natural and Synthetic MaterialsCertifications
European Standard, CE Approved – EN 345-2:1996Application
Structural Fire FightingMaterial
• Upper Rubber: 65% Natural Rubber30% Styrene
• Butadine Rubber and 5% Chloroprene Rubber
• Sole: 80% Chloroprene Rubber & 20% Nitrile Rubber Oil Resistant
• Lining: Woven Cotton Canvas
• Toe cap: Steel toe cap resistant to 200 Joule
• Heel: 80% Chloroprene Rubber & 20% Nitrile Rubber
Fire Fighting Gloves
Firefighters glove in accordance with EN 659: 2008
Performance levels 3 2 3 3 4 4- Leather glove made of hydrophobic heat-resistant Cowleather
- Pulse Protection
- Protected seams on the thumb, ring and middle fingers
- Cuff with reflective tape
- Palmhand made of 100% Twaron
- All seams are sewn with Kevlar thread
- Adjustable cuff width
- Eurotex-membrane (waterproff, windproof and breathble)
Fire Hoods
In addition to the jacket and trouser, a firefighter’s personal protection also depends on the careful selection of head, hand and foot protection. MSA Bristol supplies a range of flash hoods which have been carefully selected and tested for compatibility with the other garments to be used. A special compatibility area within our technical and design department allows firefighters to check the all-round suitability of the complete ensembles being selected for use. MSA Bristol offers a wide selection of hoods for structural, wilderness and USAR operations.
