DN 800 High Expansion Foam Generator
DN500 High Expansion Foam Generator
Features
- Portable generator made entirely in aluminium alloy. Polyester coating and hard anodisation
- Can be used either as high expansion foam generator or without its extractor function as simple fan
- It comes in two versions: 500 expansion or variable expansion from 500 to 1,200
- Flow rate is 225 lpm at 6-7 bar
- The foam concentrate is introduced in the device via a pick-up tube
Froggy Portable Fire Fighting Monitor
Specification Overview:
| Code | 18065 |
| Body material | Aluminium alloy, polyester coated |
| Flow rate | 750 lpm @ 7 bar |
| Maximum working pressure | 16 bar |
| Test pressure | 25.5 bar |
| Monitor inlet | 2.5″ BSP male thread (63 mm instantaneous male couplings available on request) |
| Monitor outlet | 1.5″ BSP male thread |
| Vertical movement | from +24° to +76°Output on multi-directional ball mounted |
| Horizontal movement | from -26° to +26°Output on multi-directional ball mounted |
| Shut-off | ball valve, quarter turn openingWaterway Ø 52 mm |
| Safety | Shutoff valveLocking pin for stabilizing legsAnchoring ring and strap |
| Weight | 6.1 kg |
JUPITER Fire Fighting Robot
Specification Overview:
| Dimensions (L x l x H) | 1240mm * 876mm * 960mm |
| Tare weight | 260 Kg |
| Maximum weight | 310 Kg |
| Payload | 340 Kg |
| Speed | 2,6 Km/h (regardless of the load) |
| Obstacle clearance | 265 mm |
| Up and down slope | 31° |
| Tilting angle | 28° |
| Stopping distance | 0 m (whatever the load) |
| Turning radius | 770 mm |
| Deviation in a straight direction | less than 1° |
| Anticorrosion treatment | Anodised aluminium alloy |
| Duration | 2 to 4 hours (1 or 2 batteries) |
| Radio range | greater than 200 m in free field conditions |
| Waterproofing | IP66 |
| Camera | Stainless steel Waterproof camera 316L (50m) 976 x 582 pixels sensor’s (Sony Super HAD II sensor) |
| Spot light | LED long range projectors 1500 LM, IP67 |
KALIPYGE Motorised Fire Fighting Monitor
Applications/Solutions
Kalipyge Motorised Fire Fighting Monitor is ideal for roof top installation in fire trucks for remote controlled operationSpecification Overview:
| Code | 44109 |
| Body, pipework, motor housings and handwheels | Aluminium alloyPolyester coated |
| Motor supports, battery holder and horizontal movement worm wheel | Aluminium alloyhard anodisation |
| Vertical worm wheel | Copper-aluminium |
| Gaskets | Nitrile |
| Axis, worm screws, balls and bolts | Stainless steel |
| Maximum working pressure | 16 bar |
| Test pressure | 25.5 bar |
| Waterway Diameter | DN80 |
| Flow rate | 4000 lpm @ 7 bar (according to the diffuser) |
| Horizontal movement | On 360°, motorised, with absolute position sensor Automatic sweeping with stops learning (depending on the control system option)Spare handwheel with foldable handle |
| Vertical movement | from -35° to +85°, motorized, with absolute position sensorSpare handwheel with foldable handle |
| Power supply | Voltage: 24V in Direct Current, 20AWaterproof Casing IP67 |
| Vertical and horizontal motion | Brushless geared motors 24V CC |
| Speed | 9°/seconds |
| Type of installation | Radio controlled installationPlug and play |
| Compatibility | Compatible POK EasyDrive |
| Outlet | 2.5″ NST-NH male thread |
| Inlet | DN80 ASA 150 inlet flange |
| Weight | 20.1 kg (w/o outlet equipment – w/o receiver – w/o battery) |
Montmirail Portable Fire Fighting Monitor
Specification Overview:
| Body | Aluminium alloy, polyester coated |
| Bearing | Bronze |
| Stabilizing legs pins | Tungsten carbide |
| Weight | 9.1 kg |
| Flow rate | 2000 lpm @ 7 bar |
| Maximum working pressure | 16 bar |
| Maximum pressure | 25.5 bar |
| Monitor inlet | Swivel inlet pipe sectionCoupling 2.5″ NST-NH |
| Monitor outlet | 2.5″ NST-NH male thread |
| Vertical movement | From +25° to +85° lockable by knob |
| Horizontal movement | From 20° to 40° |
| Pressure gauge | From 0 to 16 bar, Ø 45 mm, conform to norm EN 837-1, type 1.6 |
| Safety | Anti-lit and anti-slip safety deviceLocking pin for stabilizing legsAnchoring ring and strapPressure gauge |
POKABRONZE Fixed Flow Fire Nozzle
Specification Overview:
| Code | 16184.DSP65 |
| Body, stem, bore, rings, inlet pipe and coupling | Bronze |
| Head bumper guard and handle cover | Polyurethane |
| Stem, screws and axles | Stainless steel |
| Gaskets | Nitrile |
| Flow rate | 500 lpm @ 6 bar |
| Max. working pressure | 16 bar |
| Test pressure | 25.5 bar |
| Type of diffusion | Moulded teethFull cone diffusion |
| Stream pattern adjustment | By turning head ringStraight stream – 30° narrow spray – 110° full fog diffusion spray |
| Shutoff valve | Ball valve Ø 25 mm |
| Horizontal range | 33 meters at 500 lpm @ 6 bar |
| Inlet | DSP DN65 with lock inlet coupling (63 mm instantaneous coupling available) |
| Flush | By rotation of the head ring |
| Weight | 6 kg |
